What problems should we pay attention to when cutting the weathering board?

Weatherproof board in the process of processing and production also need to be cut, the situation of cutting weatherproof board is also more, there are more problems to pay attention to when cutting weatherproof board, so how should be cut? The following is a detailed cutting steps for your reference:

Barbecue grill

When the weatherproof plate is cut, it is necessary to pay attention to the gap can not be too large, which will promote the cold hardening of the shear thick steel plate, and cause excess stress of the cutting machine equipment, which is very strong steel plate. When cutting the general steel plate, it usually causes tearing. In this way, the cutting gap is the key to the safe operation of the machine and equipment and the cutting quality. This can be prevented.

Backyard fire pit

That is, according to a slight heating, generally below 400 degrees Celsius, and then cutting, brittle fracture can be removed and such things can be alleviated. In general, at the time of application or steel, the raw material board must be cut into steel or wool according to the specified specifications. For weathering board, the common method is to cut. The cutting head on the hydraulic shears is generally front steel, and the cutting gap of the cutting head is an important part of the cutting process. With the stainless steel plate cutting plate, its gap is not the same, the general gap is 5% of the thickness of the hydraulic shearing machine.

Fireball

The main process and method of cutting the weathering board is introduced to you above. For other aspects of the operation of the weathering board, you have any other questions and problems, please contact our factory technicians!

Corten bbq